Products

Copper bar

The product range that our company can provide you with are round, square, hexagonal and special-shaped: (1) Diameter: Φ2.0mm-Φ95mm; (2) Length: 2.5m, 3m, etc. (customizable). The lead brass products produced by our company are suitable for various structural parts made by hot stamping and cutting, such as auto parts, communication connectors, precision hardware, etc.

Online consultation

Project Introduction

Copper bar

Performance advantages of copper rods

1.Good cutting performance and mechanical properties

2.Can withstand hot and cold pressure processing

3.Good dimensional accuracy and straightness

4.Good stability to general corrosion

Alloy Grade	Cu	Pb	AI	Fe(max)	Sn	Zn	Impurity
Hpb63-3	62.0-65.0	2.4-3.0	–	0.1	–	REM	0.75
Hpb63-0.1	61.5-63.5	0.05-0.3	–	0.15	–	REM	0.5
Hpb62-2	60.0-36.0	1.5-2.5	–	0.15	–	REM	0.65
Hpb60-3	58.0-61.0	2.5-3.5	–	0.3	0.3	REM	0.8
Hpb59-1	57.0-60.0	0.8-1.9	–	0.5	–	REM	1.0
Hpb58-3	57.0-59.0	2.5-3.5	–	0.5	0.5	REM	1.0
C3601	59.0-63.0	1.8-3.7	–	0.3	Fe+Sn:0.5	REM	–
C3602	59.0-63.0	1.8-3.7	–	0.5	Fe+Sn:1.0	REM	–
C3603	57.0-61.0	1.8-3.7	–	0.35	Fe+Sn:0.6	REM	–
C3604	57.0-61.0	1.8-3.7	–	0.5	Fe+Sn:1.0	REM	–
C3605	56.0-60.0	3.5-4.5	–	0.5	Fe+Sn:1.0	REM	–
CW602N	61.0-63.0	1.7-2.8	0.05	0.1	0.1	REM	Ni 0.3 others total 0.2
CW614N	57.0-59.0	2.5-3.5	0.05	0.3	0.3	REM	Ni 0.3 others total 0.2
CW617N	57.0-59.0	1.6-2.5	0.05	0.3	0.3	REM	Ni 0.3 others total 0.2
C36000	60.0-63.0	2.5-3.0	–	0.35	–	REM	–
C36010	60.0-63.0	3.1-3.7	–	0.35	–	REM	–